Tipper Trucks
245 HP 6×2 Three-Axle Tipper Truck
A 25,000 kg GVW three-axle tipper with a 245 HP diesel engine and a 6×2 layout. It adds a configuration between two-axle road-work tippers and the tandem-drive 6×4 trucks already listed.
Truck specifications
Chassis and powertrain
- Drive layout
- 6×2
- Gross vehicle weight
- 25,000 kg
- Engine
- YCS06245-60 diesel
- Engine output
- 245 HP
- Engine displacement
- 6234 ml
- Transmission
- FAST 12-speed manual
- Wheelbase
- 1850 + 4900 mm
- Overall dimensions
- 10,400 × 2550 × 3200 mm
Tank and working system
- Body type
- Open tipping body
- Lift-cylinder position
- Front
- Tarpaulin
- Available to specify
Operating capabilities
The 1850 + 4900 mm wheelbase creates a different loading and turning envelope from a short 4×2 chassis. Check the yard entrance and the space beside the loading equipment.
The 6×2 layout has one driven axle. Select it around the road surface and axle-load distribution required by the job.
Applications
Bulk-material distribution, road maintenance contracts and construction haulage with suitable access for a 10.4 m vehicle.
When to choose another capacity
For machinery transfers rather than loose-material tipping, compare a lowbed trailer. Lowbed and container semi-trailers
For frequent soft-ground haulage, compare the driven-axle layout with other tippers. Tipper truck range
Configuration options
For frequent soft-ground running, compare the traction requirement with a 6×4 or 4×4 configuration before choosing this chassis.
State the required body volume and material density. Body dimensions, tailgate arrangement and steel thickness should be fixed in the build drawing.
After-sales support and documents
Request the chassis and body manuals, maintenance schedule, parts identification and agreed warranty scope with the quotation. Include destination country, port and steering requirement for the export configuration.
Frequently asked questions
Is this a 6×4 tipper?
It is listed as 6×2: three axles with one driven axle. It should be compared separately from tandem-drive 6×4 models.
How large is the chassis?
The specification gives overall dimensions of 10,400 × 2550 × 3200 mm and a wheelbase of 1850 + 4900 mm.
How should I specify the tipping body?
Provide the required internal dimensions, carried material and typical load. Agree the steel grade, floor and side thickness, tailgate and load cover in the build specification.
What to include in your enquiry
Material and bulk density · Required payload · Internal body dimensions · Route and gradients · Steering · Destination port · Quantity
