CLW / TRUCK SOLUTIONS

Municipal and Sanitation Trucks for Your Service Routes

We help councils, water utilities and private service operators define the vehicles for their collection and cleaning tasks. We review the route, waste or water duty and existing bins or equipment, then prepare a chassis and body proposal with the required steering arrangement. The combinations below are starting points for a project discussion.

Vehicle Combinations to Discuss

We use the tasks below to develop a vehicle schedule. The final combination and quantities follow your operating brief, with each capacity, chassis and equipment package specified and quoted for the order.

01 / WORK PACKAGE

Refuse collection and container transfer

Discuss a refuse compactor for a compatible bin-collection system, with a hook-lift truck where the operation uses exchangeable containers. We review whether these vehicles serve separate routes or a collection-and-transfer arrangement, rather than assume the same equipment suits every waste stream.

02 / WORK PACKAGE

Septic collection and sewer maintenance

Discuss an exhauster for vacuum collection and a jetting vehicle for the specified sewer-cleaning duty. A combined jetting and suction truck is another configuration to review where both functions are required. We distinguish waste consistency, suction reach and jetting requirements before selecting the package.

03 / WORK PACKAGE

Street sweeping and water service

Discuss a road or washing sweeper alongside a water bowser for the separate spraying, wash-down or water-supply task. We review street access, debris, sweeping coverage and refill arrangements. Tank, hopper and spray requirements are identified individually in the proposed specification.

Selection Points We Review With You

Collection and disposal cycle
We use the service area, daily volume, collection frequency and travel to the disposal point to discuss body size and vehicle numbers. Include any waiting or unloading constraints.
Access and loading interface
We review narrow entrances, turning space, crew access, bin dimensions and the lifter interface. Send photographs or a bin specification where the fleet must work with equipment already in use.
Wastewater and sewer duty
We identify the waste type, hose reach, suction conditions, discharge point and any required jetting work. Tank volume and the working system are recorded as separate parts of the specification.
Water and road-cleaning duty
We distinguish water transport, spraying and street washing. For drinking-water service, identify the intended use before the tank material, cleaning access and discharge equipment are selected.
Chassis and working layout
We review the requested LHD or RHD chassis together with operator steps, controls, hoses and traffic-side working access. The written offer identifies the agreed arrangement.

What CLW Can Prepare for Your Project

A configuration for each service task

We prepare the proposed capacities, chassis and working equipment against your route information. The quotation identifies the collection interface and any optional items so the service fleet can be reviewed vehicle by vehicle.

Inspection around the working equipment

We support a factory visit, video review or buyer-appointed third-party inspection against the agreed schedule. The review can focus on the selected loading interface, cab arrangement and specified working functions, with scope and charges agreed for the order.

Documents and maintenance planning

We provide the agreed commercial and available manufacturer information for the selected vehicles. We discuss component identification, document-language requirements and any parts or support scope alongside the chassis and body schedule.

Review inspection, documents and support planning →

Send the Brief for This Work

Send the service tasks, daily collection or cleaning workload, route access, disposal or refill locations, bin details, required steering, quantity and destination. Include any municipal tender specification and the inspection or handover documents needed.

Plan the Destination Alongside the Vehicle

We use the country, named port and final town or site to develop the steering, document and delivery discussion. Explore the relevant market page for route options and the official import-planning sources used there.

Explore all markets →

Vehicle Solution FAQ

Should I choose an exhauster or a combined jetting and suction truck?

We start with the actual work. Vacuum collection, pressure jetting and a requirement for both functions have different equipment briefs. Send the waste type, hose reach and sewer-cleaning duty so we can develop the appropriate configuration.

Can the collection truck work with our existing bins?

We review the bin dimensions, loading method and required lifter interface before specifying the body equipment. Share a bin specification or clear photographs with the route brief.

Can you prepare a municipal fleet quotation?

We can organise the requested vehicles into a specification and quotation, identify the chassis and steering, and agree the inspection, document and delivery scope. Each capacity and equipment package is priced for the order.

Compare the six solution scenarios →

Build a Vehicle Brief With CLW

Send the job, daily duty, capacity, access conditions and destination. We will work through the proposed vehicles, equipment and order scope with you.

[email protected]

YOUR NEXT TRUCK STARTS HERE

Tell us what the job needs.

Truck type. Capacity. Quantity. Destination.

Request a quotation →
WhatsApp